Caravan Bed and Mattress Sizes
Angelo AlbertiniTable of Contents
- Comparative Dimensions: Standard UK vs. Caravan Bed Sizes
- Caravan Island Bed and Mattress Sizes
- One-Piece Transverse Flat Bottom Caravan Island Bed\Mattress
- Two-Piece Transverse Island Bed
- Queen Island Bed
- Single Caravan and Bunk Bed Mattresses
- Left Cut Off (Nearside) Caravan Mattress
- Right Cut Off (Offside) Caravan Mattresses
- Drop Down Beds
- RIB Beds
- Over Cab Beds
- FAQ's
Comparative Dimensions
Understanding the subtle differences between standard UK bed sizes and typical caravan dimensions is essential for ensuring a snug fit and optimal comfort during your travels.
Standard Sizes vs. Caravan Sizes (Inches & Feet)
| Bed Type | Standard UK Sizes | Caravan Sizes |
|---|---|---|
| Double Bed | 4ft 6 in x 6ft 3 in | Up to. 4ft 6 in x 6ft 4 in |
| King Size | 5ft x 6ft 6 in | Up to. 5ft 2 in x 6ft 9 in |
| Super King Size | 5ft 6 in x 6ft 6 in | Up to. 6ft 7 in x 7ft 3 in |
Standard Sizes vs. Caravan Sizes (Centimetres)
| Bed Type | Standard UK Sizes | Caravan Sizes |
|---|---|---|
| Double Bed | 135 cm x 190 cm | Up to. 137 cm x 192 cm |
| King Size | 150 cm x 200 cm | Up to. 157 cm x 205 cm |
| Super King Size | 180 cm x 200 cm | Up to. 200 cm x 220 cm |
Embark on your replacement mattress shopping journey by exploring our caravan mattress collection
Caravan Island Bed & Mattress Sizes
Caravan island bed and mattress sizes can differ based on the caravan's make, model, and specific layout. However, there are some general dimensions that are typically observed for various island bed sizes in caravans
| Bed | Width | Length |
|---|---|---|
| Double | Up to 54 (4'6") | Up to 76 (6'4") |
| King Size | Up to 62 (5'2") | Up to 81 (6'9") |
| Super King Size | Up to 79 (6'7") | Up to 87 (7'3") |
Caravan island bed dimensions, as you might have noticed, often slightly differ from the standard UK bed and mattress sizes. While the aforementioned sizes serve as a general guideline, keep in mind that these are approximate measurements.
Actual bed sizes can vary depending on the caravan manufacturer and the specific model. It's always best to consult the specifications of your particular caravan to ensure you have the accurate dimensions. This variation, albeit minor, underscores the importance of opting for a made-to-measure mattress for your RV. A precise fit is essential, not only for comfort but also to optimise space within the limited confines of an RV.
If you're looking for a tailored solution to fit your caravan's unique dimensions, our caravan mattress page offers a range of customisable options to suit a myriad of needs.
One-Piece Transverse Island Bed/Mattress with Rounded Corners
The dimensions of a one-piece transverse island bed or mattress with rounded corners can differ based on the caravan's make and model. While there isn't a universally accepted size for this particular style of bed, frequently observed measurements for transverse island beds in caravans include:
| Bed | Width (inches) | Width (cm) | Length (inches) | Length (cm) |
|---|---|---|---|---|
| Double | Up to 54 (4'6") | Up to 137 | Up to 76 (6'4") | Up to 192 |
| King Size | Up to 62 (5'2") | Up to 157 | Up to 81 (6'9") | Up to 205 |
| Super King Size | Up to 79 (6'7") | Up to 200 | Up to 87 (7'3") | Up to 220 |
Two-Piece Transverse Island Bed With Loose or Zip-Attached
These measurements are approximate, and actual bed sizes can differ between caravan manufacturers and models. To ensure accurate dimensions, it's best to consult the specifications of your specific caravan.
The sizes of a two-piece transverse island bed can vary depending on the make and model of the caravan. However, typical dimensions for two-piece transverse island beds are similar to those of one-piece beds:
| Bed | Width (inches) | Width (cm) | Length (inches) | Length (cm) |
|---|---|---|---|---|
| Double | Up to 54 (4'6") | Up to 137 | Up to 76 (6'4") | Up to 192 |
| King Size | Up to 62 (5'2") | Up to 157 | Up to 81 (6'9") | Up to 205 |
| Super King Size | Up to 79 (6'7") | Up to 200 | Up to 87 (7'3") | Up to 220 |
In a two-piece bed, the dimensions are typically divided into two sections, but they're often not equal. In most cases, the bolster, which is the removable first section, measures around 20cm to 25cm. There are rare instances, primarily in motorhomes or boats, where a section of the mattress can be up to a third of the overall size. It's essential to understand that these figures are approximate, and actual bed sizes can differ between caravan manufacturers and models. For precise measurements, it's always best to refer to the specifications of your specific caravan or boat.
Begin your quest for the perfect caravan island mattress by selecting the mattress type you desire on our dedicated page.
Queen Island Bed
A queen island bed typically measures 60 inches wide by 80 inches long (152 cm by 203 cm). This bed size is popular in North American homes and recreational vehicles, providing ample space and comfort for two adults. In a caravan, motorhome, or RV setting, a queen island bed is usually positioned to allow access from both sides, making it convenient and easy to move around the bed. Keep in mind that the actual dimensions of a queen island bed in a caravan might vary slightly depending on the manufacturer and model.
Single Caravan and Bunk Bed Mattresses
Single caravan mattresses and bunk bed mattresses can come in various sizes depending on the manufacturer, model, and design of the caravan. However, some common dimensions for caravan bunk bed mattresses are:
| Mattress | Dimensions (in) | Dimensions (cm) |
|---|---|---|
| Small single | 30 inches x 75 inches | 76 cm x 191 cm |
| Standard single | 36 inches x 75 inches | 91 cm x 191 cm |
These sizes are approximate, and actual dimensions may vary depending on the specific caravan model. It is always best to consult the manufacturer's specifications or measure the bunk bed frame directly to ensure the correct mattress size is selected.
Left (Nearside) Angled Cut Caravan Mattress
A caravan mattress with a nearside angled cut, can vary in size depending on the specific make and model of the caravan or motorhome. There are no standard dimensions for this type of mattress, as they are often custom-made to fit the unique shape of the sleeping area in the vehicle. Enjoy a perfect night's sleep no matter your caravan's layout with a custom memory foam mattress.
To determine the correct size for a left cut off mattress, it is important to take accurate measurements of the sleeping area, accounting for the angle of the cut and the dimensions of the remaining rectangular section. These measurements can then be used to order a custom mattress designed to fit the space perfectly.
Image 1. A line drawing of a left (nearside) angled cut with rounded corner caravan mattress.
Image 2. A line drawing of a left (nearside) angled cut caravan mattress.
While there are no standard sizes for left cut off (nearside) caravan mattresses, I can provide you with some popular dimensions that are commonly seen in the industry. Keep in mind that these sizes can vary, and it is always best to measure your specific sleeping area to ensure a proper fit.
| Mattress | Dimensions (in) | Dimensions (cm) |
|---|---|---|
| 72 x 54 with 12-inch cut off | 72 inches x 54 inches | 183 cm x 137 cm with a 30 cm cut off |
| 75 x 48 with 15-inch cut off | 75 inches x 48 inches | 191 cm x 122 cm with a 38 cm cut off |
| 78 x 60 with 20-inch cut off | 78 inches x 60 inches | 198 cm x 152 cm with a 51 cm cut off |
Please note that these dimensions are approximate and may not fit every caravan or motorhome with a left cut off nearside sleeping area. It is crucial to measure your specific space and consult with a mattress provider or manufacturer for a custom solution.
Right (Offside) Angled Cut Caravan Mattresses
Just like left angled cut mattresses, there are no standard sizes for right cut (offside) angled cut caravan mattresses. However, I can provide you with some popular dimensions that are commonly seen in the industry. Remember that these sizes can vary, and it is always best to measure your specific sleeping area to ensure a proper fit.
| Mattress | Dimensions (in) | Dimensions (cm) |
|---|---|---|
| 72 x 54 with 12-inch cut off | 72 inches x 54 inches | 183 cm x 137 cm with a 30 cm cut off |
| 75 x 48 with 15-inch cut off | 75 inches x 48 inches | 191 cm x 122 cm with a 38 cm cut off |
| 78 x 60 with 20-inch cut off | 78 inches x 60 inches | 198 cm x 152 cm with a 51 cm cut off |
Please note that these dimensions are approximate and may not fit every caravan or motorhome with a right cut off offside sleeping area. It is crucial to measure your specific space and consult with a mattress provider or manufacturer for a custom solution.
Drop Down Beds
Drop-down beds, also known as pull-down, overhead beds, or electric lift beds are often found in motorhomes or campervans. They are space-saving solutions that can be lowered from the ceiling or a cabinet when needed.
The size of the mattress used for drop-down beds in motorhomes or campervans will depend on the dimensions of the bed itself. As mentioned earlier, common dimensions for drop-down beds include:
| Mattress | Dimensions (in) | Dimensions (cm) |
|---|---|---|
| Small single | 72 inches x 27 inches | 183 cm x 69 cm |
| Single | 75 inches x 30 inches | 191 cm x 76 cm |
| Small double | 75 inches x 48 inches | 191 cm x 122 cm |
| Double | 75 inches x 54 inches | 191 cm x 137 cm |
It is essential to measure the drop-down bed in your specific vehicle and consult the vehicle manufacturer or a mattress provider to ensure you purchase the correct mattress size. The mattress should fit the dimensions of the bed frame snugly to provide a comfortable and supportive sleeping surface.
The shapes of drop-down beds are generally determined by the interior layout and design of the vehicle. However, the most common shapes for drop-down beds are:
- Rectangular: This is the most common shape for drop-down beds, providing a simple and efficient design that fits well in most vehicle interiors. Rectangular mattresses can accommodate one or two people, depending on the width and length of the bed.
- Square: Though less common, square-shaped drop-down beds can also be found in some vehicles. They are typically designed for one person and may be suitable for smaller campervans or motorhomes.
It's worth noting that the mattress or cushioning on a drop-down bed may be contoured or have rounded edges to fit more seamlessly within the vehicle's interior when the bed is in its stored position. The shape of the drop-down bed will largely depend on the design and layout of the vehicle and the specific requirements of the owner.
RIB Beds
RIB beds are a popular type of seating and sleeping system used in campervans and motorhomes. RIB is a French company that manufactures these high-quality, versatile, and comfortable beds. These beds usually feature a foldable design, allowing them to be easily transformed from a seat into a bed and vice versa. This flexibility makes them a popular choice for maximizing space and functionality in small vehicles.
RIB beds come in various sizes, and the most common ones are:
- 112 cm wide (44 inches) - suitable for one person or for small campervans
- 120 cm wide (47 inches) - offers slightly more space for one person or can be used as a cosy bed for two
- 130 cm wide (51 inches) - a more spacious option for two people
- 150 cm wide (59 inches) - provides extra space and comfort for two people
Please note that the length of RIB beds can also vary. When choosing a RIB bed, it's essential to consider the available space in your vehicle and your personal preferences for comfort.
Over Cab Beds
The size of mattresses used for over cab beds can vary depending on the specific make and model of the motorhome or RV. However, some common sizes for over cab beds include:
- Small Double: Approximately 48 inches x 75 inches (122 cm x 191 cm)
- Three-Quarter: Approximately 48 inches x 80 inches (122 cm x 203 cm)
- Custom sizes: In some cases, over cab beds may have a unique shape or size that requires a custom size mattress.
Keep in mind that these are general guidelines and that the actual size of the mattress may differ depending on the vehicle. It is always a good idea to measure the bed platform or existing mattress in your motorhome or RV to ensure you select the correct size replacement mattress.
FAQ
Q: How many pieces make a transverse island bed?
A: A transverse island bed can be made up of one or two pieces. A one-piece transverse island bed is a single mattress that spans the width of the caravan. In contrast, a two-piece transverse island bed consists of two separate mattresses that, when placed together, form the complete bed. The choice between a one-piece and two-piece bed depends on personal preference and the design of the caravan.
Q: What is the difference between a two part transverse island bed and a two part island bed?
A: A two-part island bed and a two-part transverse island bed both consist of two separate mattresses that, when placed together, form a complete bed. The main difference between these two types of beds lies in their orientation within the caravan:
Two-part island bed: The bed is typically positioned longitudinally (lengthwise) within the caravan, with the head of the bed against the wall and the foot of the bed facing the centre of the caravan. Access to the bed is available on either side, allowing for easy movement around the bed.
Two-part transverse island bed: The bed is positioned transversely (width wise) across the caravan, with the head and foot of the bed touching opposite walls of the caravan. This layout also provides access to the bed from both sides and maximizes the available floor space in the sleeping area.
While both types of beds offer similar sleeping arrangements and access, the main difference is their orientation within the caravan, which can impact the overall layout and design of the living space.
Q: Is a 4ft x 7ft a popular caravan mattress size?
A: A 4ft x 7ft (48 inches x 84 inches or 122 cm x 213 cm) mattress size is not very common in caravans or motorhomes. However, caravan and motorhome mattress sizes can vary significantly depending on the make and model of the vehicle.
The most popular caravan mattress sizes tend to be smaller, such as:
- 72 inches x 48 inches (183 cm x 122 cm)
- 75 inches x 52 inches (191 cm x 133 cm)
- 78 inches x 60 inches (198 cm x 152 cm)
That being said, if you require a 4ft x 7ft mattress for your caravan, it is possible to have one custom made to fit your specific needs. Always measure your sleeping area and consult with a mattress provider or manufacturer for a tailored solution.
Q: What are rib beds?
A: RIB beds are a popular type of seating and sleeping system used in campervans and motorhomes.
Q: Do RIB bed mattresses usually have a notch cut out?
A: A RIB bed, which is a popular seating and sleeping solution in campervans, typically does not have a notch cut out of it. It usually consists of a bench seat that converts into a flat sleeping surface. However, customizations can be made to a RIB bed to fit the specific layout and design of a campervan, which may include a notch or cut-out to accommodate any structural elements or fixtures in the vehicle. It is essential to consider the specific design and requirements of your campervan when selecting or customizing a RIB bed.
Q: Whats the difference between a overhead cab bed and a drop down bed?
A: An overhead cab bed and a drop-down bed are both sleeping solutions for campervans, motorhomes, or RVs, but they differ in terms of design and location within the vehicle.
Overhead cab bed:
- Also known as a cab-over bed, Luton bed, or alcove bed, this type of bed is located above the driver's cab in a motorhome or RV.
- It is a fixed bed that utilizes the space over the cab area, maximizing the available living area in the vehicle.
- Access to the overhead cab bed is typically via a ladder or steps.
- Overhead cab beds are most commonly found in Class C motorhomes or larger van conversions.
- They can accommodate one or two people, depending on the size of the bed.
Drop-down bed:
- A drop-down bed, also known as a pull-down or electric lift bed, is installed in the ceiling area of the living space within a campervan, motorhome, or RV.
- This type of bed can be lowered for use when needed and raised back up to create more living space when not in use.
- Drop-down beds are often operated by an electric mechanism, making them easy to lower and raise.
- They can be found in various types of motorhomes and RVs, including Class A, Class B, and Class C vehicles.
- Drop-down beds can accommodate one or two people, depending on the width and length of the bed.
In summary, the main differences between an overhead cab bed and a drop-down bed are their locations within the vehicle and the way they are accessed and utilized. An overhead cab bed is a fixed bed situated above the driver's cab, while a drop-down bed is a retractable bed installed in the ceiling area of the living space.
Q: What shape mattress us usually used for a transverse bed?
A: A transverse bed, often found in caravans and motorhomes, is a bed that is positioned horizontally across the width of the vehicle. The mattress for a transverse bed is typically rectangular in shape. However, it may have slightly rounded or angled corners to accommodate the contours of the vehicle's interior or to provide easier access to storage areas beneath the bed. The specific shape and dimensions of a transverse bed mattress may vary depending on the make and model of the caravan or motorhome.